webForumDet fria alternativet

bootkrångel på Asus a7v266 MX

Datorhårdvara

3 svar · 534 visningar · startad av yaz

Medlem sedan maj 20021 028 inlägg
Frågan#1

Skulle byta hårddisk på en dator och då dök ett spökproblem upp, som uppenbarligen beror på moderkortet. När jag kopplar in elen i nätagget så startar datorn spontant, tappar strömtillförseln efter två sekunder i en halv sekund, och sedan startar den upp som den ska. Detta händer även när jag startar den med PWR-knappen.

Jag har testat följande:

1. Bytt nätagg till ett annat (nytt) 300W. Samma fenomen.

2. Ändrat alla möjliga inställningar i BIOS som har med ACPI/Sleep/Shut down/Suspend att göra. Inget resultat.

3. Sökt efter lösningar på google. Där dök problemet upp vid flera tillfällen, varvid jag förstod att det är ett allmänt problem på just detta moderkort. En lösning föreslog att man ska manuellt ställa in minnets timing. Inget resultat av det heller.

4. Testat att PWR-knappen är korrekt kopplad.

5. Testat med annan PWR-knapp ifall den skulle vara trasig. Samma problem.

6. Kopplat bort det mesta från moderkortet. Bara cpu, grafikkort och minne satt kvar, men problemet kvarstod. Minnet sitter i den första minnesplatsen.

7. Testade att stoppa in elsladden i nätagget UTAN att ha PWR-knappen ikopplad på moderkortet. Datorn startade inte upp spontant, men å andra sidan gick det inte heller att starta upp datorn överhuvudtaget.

Problemet kompliceras ytterligare av att det inte heller går att stänga ner datorn ordentligt från windows. Windows stänger ner som det ska, och när det är dags att bryta strömmen så stängs endast hårddisken ner. Allt annat snurrar vidare, och det går inte att starta om (ctrl-alt-del) eller få datorn att vakna upp (så det handlar inte om att den går i vänteläge, eller sleepmode).

Jag har suttit med detta en hel dag nu, fram till kl. 02 igår natt, men utan resultat. Jag ser att många har exakt samma, och liknande problem med detta moderkortet, men jag ser inte hur det ska gå att lösa. Hopplöst! x(

Medlem sedan jan. 20027 905 inlägg
#2

7. Testa att starta genom att kortsluta med en liten skruvmejsel.

Medlem sedan aug. 20003 473 inlägg
#3

Du kan ha skadat nån krets närd u va inne i datorn o meckade

ESD skador kan ställa till med mycket.

Kolla byglarna intill ide kontakterna på moderkortet om du kanske kom åt nått där

Medlem sedan maj 20021 028 inlägg
#4

muskot: testade skruvmejseltricet, tyvärr utan resultat..

saken är den att moderkortet verkar ha detta problem från början egentligen. Och jag minns att jag hade haft det förut också, men sen fungerade det så länge man inte mekade med datorn och drog ur strömmen o så...

i en tråd står det så här (det är två personer som har detta problem. och den ene har två likadana moderkort):

I am using ASUS MotherBoard A7V266-MX....
My processor is Athlon XP 2400+ . I am using Windows 98 SE as the operating
system.

When I boot the system the follows things happen during POST (Power On Self
Test) :
When I turn on the 'ATX power switch' the "System Power LED" and the "Hard
Disk Activity LED" light up for a while and then both goes off for a few
seconds ( at this time the System turns the power OFF and the CPU fan also
stops rotating ...), then the Systems automatically turns the power ON and
the system boots normally.
The above thing only happens when I switch OFF the "Main power supply" after
shutting down the system, and then switch ON the Main power supply and turn
the ATX power switch ON. It does NOT happen when I do NOT turns the "Main
Power supply" OFF after shutting down the system.

Why does this happen ?
Is it a problem of the hardware/BIOS , or it is a feature of the
hardware/BIOS/POST .
If it is a problem or defect then what is the solution ?

The same thing is happening to my two Mobos (a7v266-mx) though I am
running Win XP.

One response to the original post was that the AC Loss Auto Restart
bios setting should be changed but that hasn't helped.

Another response was that this was also a problem on another ASUS mobo
model and one should just get used to it.

My question is this: does this behavior of applying power for about
two seconds and then removing it for about a quarter second and then
applying it again not damage the hard disks. I mean they're just
revving up and the power is removed to be restored almost immediately.

Shouldn't there be a way (is there?) of preventing this?

Oh, and btw, one of the two mobos does not beep at power up, the other
one does. The first does beep when the RAM is removed. As far as I can
tell, the bios settings on the two mobos are identical (default).
Strange.

http://www.howtofixcomputers.com/bb/sutra152733.html

liknande trådar/inlägg hittade jag när jag sökte på google groups.. :x

247 ms totalt · 4 externa anrop · v20260731065814-full.86ec41c2
124 ms — deklarationer (db)
0 ms — hämta statistik (cache)
120 ms — hämta tråd, inlägg och bilagor (db)
123 ms — ändringar (db)