cdrecord: No CD/DVD-Recorder device specified.
cdrecord: Usage: cdrecord [options] track1...trackn

Options:
        -version        print version information and exit
        -v              increment general verbose level by one
        -V              increment SCSI command transport verbose level by one
        -debug          print additional debug messages
        dev=target      SCSI target to use as CD/DVD-Recorder
        timeout=#       set the default SCSI command timeout to #.
        driver=name     user supplied driver name, use with extreme care
        driveropts=opt  a comma separated list of driver specific options
        -checkdrive     check if a driver for the drive is present
        -prcap          print drive capabilities for MMC compliant drives
        -inq            do an inquiry for the drive end exit
        -scanbus        scan the SCSI bus end exit
        -reset          reset the SCSI bus with the cdrecorder (if possible)
        -ignsize        ignore the known size of a medium (may cause problems)
        -useinfo        use *.inf files to overwrite audio options.
        speed=#         set speed of drive
        blank=type      blank a CD-RW disc (see blank=help)
        fs=#            Set fifo size to # (0 to disable, default is 4 MB)
        -load           load the disk and exit (works only with tray loader)
        -eject          eject the disk after doing the work
        -dummy          do everything with laser turned off
        -msinfo         retrieve multi-session info for mkisofs >= 1.10
        -toc            retrieve and print TOC/PMA data
        -atip           retrieve and print ATIP data
        -multi          generate a TOC that allows multi session
                        In this case default track type is CD-ROM XA2
        -fix            fixate a corrupt or unfixated disk (generate a TOC)
        -nofix          do not fixate disk after writing tracks
        -waiti          wait until input is available before opening SCSI
        -force          force to continue on some errors to allow blanking bad disks
        -dao            Write disk in DAO mode. This option will be replaced in the future.
        tsize=#         Length of valid data in next track
        padsize=#       Amount of padding for next track
        pregap=#        Amount of pre-gap sectors before next track
        defpregap=#     Amount of pre-gap sectors for all but track #1
        mcn=text        Set the media catalog number for this CD to 'text'
        isrc=text       Set the ISRC number for the next track to 'text'
        index=list      Set the index list for the next track to 'list'
        -audio          Subsequent tracks are CD-DA audio tracks
        -data           Subsequent tracks are CD-ROM data mode 1 (default)
        -mode2          Subsequent tracks are CD-ROM data mode 2
        -xa1            Subsequent tracks are CD-ROM XA mode 1
        -xa2            Subsequent tracks are CD-ROM XA mode 2
        -cdi            Subsequent tracks are CDI tracks
        -isosize        Use iso9660 file system size for next data track
        -preemp         Audio tracks are mastered with 50/15 s preemphasis
        -nopreemp       Audio tracks are mastered with no preemphasis (default)
        -pad            Pad data tracks with 15 zeroed sectors
                        Pad audio tracks to a multiple of 2352 bytes
        -nopad          Do not pad data tracks (default)
        -shorttrack     Subsequent tracks may be non Red Book < 4 seconds if in DAO mode
        -noshorttrack   Subsequent tracks must be >= 4 seconds
        -swab           Audio data source is byte-swapped (little-endian/Intel)

The type of the first track is used for the toc type.
Currently only form 1 tracks are supported.
